Density Meter

Benchtop and Portable Digital Densimeter

A density meter, also known as densimeter or specific gravity meter, is an analytical instrument that uses the oscillation of a U-shaped hollow glass tube to measure the density of liquid samples quickly and automatically. The measured density can then be automatically converted into other units and concentrations for specific applications, as specific gravity, API, alcohol%, Brix and many more. Choose your density meter from the lightest portable option to the most accurate benchtop model.

Call for Quote
View Results ()
Filter ()

Add 1 or 2 more products to compare
+65 6890 0011
Call Service
Uptime
Support & Repair
Performance
Maintenance & Optimization
Compliance
Calibration & Quality
Expertise
Training & Consulting

FAQs

How does a digital density meter work?

Digital density meters (specific gravity meters) use a U-shaped hollow glass tube, which is put into oscillation. The oscillation frequency of the tube filled with the sample is measured. This frequency changes when the tube is filled with the sample: the higher the mass of the sample, the lower the frequency. This frequency is measured and converted to density. In addition, benchtop digital density meters use a built-in Peltier thermostat to control the temperature of the sample.

Check here for additional information on density measurement, the definition, equation, influences and more.

Specific gravity meter vs. density meter vs. densimeter: What is the difference?

A specific gravity meter, density meter or densimeter refers to the same instrument. Different terms are used depending on the country or region in which it is used. This instrument uses oscillating U-tube technology to measure specific gravity, density or related values in a liquid sample. This measurement is performed automatically, reducing operator influence and improving repeatability.

Which instruments are used to measure the density of liquids?

The density of a solution can be measured manually or digitally. For more detailed information on how to measure density with pycnometers, hydrometers and digital density meters please see our 3 Ways to Measure Density guide.

Manual methods like pycnometers and hydrometers are widely used for the determination of density and related values, e.g. specific gravity, alcohol%, BRIX°, API degrees, Baumé, Plato, etc. Although these methods are easy to use and quite inexpensive, they require expertise in every step of manual operation protocols, which often affects the accuracy and reliability of the results.

A pycnometer is a glass beaker of defined volume. It is weighed without the sample (M1), then filled with the sample and weighed again (M2). The difference between M1 and M2 divided by the volume of the beaker is the density of a sample.

A hydrometer is a glass body which is dipped into the sample. After a short equilibration time it will float a certain level. The higher the density of the sample, the less the hydrometer will float. The level of equilibration reads the density.

A density kit is used with a balance. A glass body of defined volume is weighed in air (M1), dipped into the sample and weighed again in the sample (M2). The difference between M1 and M2 (buoyancy) divided by the volume of the glass body is the density of the sample. A special holder can also be used to measure the density of solids using a reference liquid (water, ethanol or user defined).

Digital density meters, also known as specific gravity meters or densimeters, are available as benchtop and handheld instruments. They use oscillation tube technology to very accurately measure the density of a sample in a short timeframe. A hollow glass tube vibrates at a certain frequency. This frequency changes when the tube is filled with the sample: the higher the mass of the sample, the lower the frequency. This frequency is measured and converted to density. In addition, benchtop digital density meters use a built-in Peltier thermostat to control the temperature of the sample.

For more information on digital density meters and how they compare to manual methods, please see our comparison of different measuring techniques.

How much sample volume do you need for a digital density meter?

The typical volume of a U-shaped hollow glass tube used as a measuring cell in a digital density meter is around 1mL. For trouble free filling a bigger volume is recommended. Typically 3 mL to 5 mL would be used with a syringe in order to have part of the drain tube also filled with the sample.

How much time do you need to measure a sample with a digital density meter?

This depends on the temperature difference between the sample and the measuring cell as well as on the sample type. It depends also on the required accuracy of the measurement. The measuring time can typically range from a few seconds with a portable digital density meter without temperature control to 2 to 5 minutes with a benchtop instrument with active temperature control.

How do you adjust a digital density meter / specific gravity meter?

Usually density meters, also known as densimeters or specific gravity meters, are adjusted with air and water at a specific measuring temperature. This temperature is controlled with a Peltier element, which can cool down or heat up the measuring cell to a specific temperature (e.g., 20°C). First, the frequency of the measuring cell filled with air is measured. This frequency is assigned to the density value of air. Then the measuring cell is filled with water and the frequency of the measuring cell filled with water is measured. This second frequency is assigned to the density value of water. This two-point adjustment can also be done with air and a standard, or with two standards covering different density ranges.

Learn more about how to adjust your digital density meter.

Which samples can be measured with digital density meters / specific gravity meter?

These density meters were originally designed and intended for measuring homogeneous liquids. In practice, many other samples are measured as well with good success. If the sample viscosity can be brought down to below 36,000 mPa*s by heating at the pumping temperature (e.g. paraffin), density can even be measured automatically with a heated automation unit like the SC1H or SC30H. Samples with higher viscosity can be measured manually if they can be filled into a syringe without trapping air pockets and if the operator can then press these samples out at a controlled speed through a narrow, long tube of about 15 cm in length. Samples which attack the glass U-tube of the measuring cell (e.g. hydrofluoric acid, liquids or pastes used for etching glass) should not be measured with such density meters.